NOTE: Certain USB devices may not charge when the computer is
turned o or in sleep state. In such cases, turn on the computer to
charge the device.
3 Headset port
Connect a headphone or a headset (headphone and microphone combo).
Bottom
1 Service Tag label
The Service Tag is a unique alphanumeric identier that enables Dell service
technicians to identify the hardware components in your computer and access
warranty information.
2 Power-adapter port
Connect a power adapter to provide power to your computer.
3 Network port (with lights)
Connect an Ethernet (RJ45) cable from a router or a broadband modem for
network or internet access.
The two lights next to the connector indicate the connectivity status and
network activity.
4 Audio-out port
Connect audio-output devices such as speakers, ampliers, and so on.
5 Input-source selection button
Press to select the video-input source.
6 Power button
Press to turn on the computer if it is turned o, in sleep state, or in hibernate
state.
Press to put the computer in sleep state if it is turned on.
Press and hold for 4 seconds to force shut-down the computer.
11
To Next Page
Loading...
