Removing the computer cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Place the computer on its side.
2 Remove the two screws (#6-32xL6.35) that secure the cover to the chassis.
3 Release the computer cover by sliding it towards the back of the computer, lift
the cover off the chassis.
18
To Next Page
Loading...
