Replacing the antenna modules
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the antenna modules with the bump on the chassis and adhere the antenna
modules to the chassis..
2 Route the antenna cables through the routing guides on the chassis.
Post-requisites
1 Follow the procedure from step 3 to step 5 in “Replacing the wireless card”.
2 Follow the procedure from step 5 to step 8 in “Replacing the optical drive”.
3 Replace the front bezel.
4 Replace the computer cover.
55
To Next Page
Loading...
