Removing the computer cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Place the computer on its side.
2 Remove the two screws (#6-32x6.35) that secure the computer cover to the chassis.
3 Slide the computer cover towards the back of the computer and lift the computer cover o the chassis.
4
12 Removing the computer cover
To Next Page
Loading...
