Replacing the computer cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Align the tabs on the computer cover with the slots on the chassis and slide it towards the front of the computer until it snaps into
position.
2 Replace the two screws (#6-32x6.35) that secure the computer cover to the chassis.
3 Place the computer in an upright position.
5
Replacing the computer cover 13
To Next Page
Loading...
