Replacing the front bezel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the tabs on the front bezel with the slots on the chassis, and then rotate the front bezel towards the chassis until it snaps into
place.
NOTE
: Ensure that the front-bezel slot is aligned correctly with the optical drive.
2 Place the computer on its side.
7
16 Replacing the front bezel
To Next Page
Loading...
