Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the system board.
2. Install the I/O board.
3. Install the touchpad.
4. Install the power button with optional fingerprint reader.
5. Install the speakers.
6. Install the power-adapter port.
7. Install the display assembly.
8. Install the heat sink.
9. Install the coin-cell battery.
10. Install the fan.
11. Install the wireless card.
12. Install the M.2 2230 solid-state drive or the M.2 2280 solid-state drive in M.2 slot two.
13. Install the M.2 2230 solid-state drive or the M.2 2280 solid-state drive in M.2 slot one.
14. Install the memory modules.
15. Install the 3-cell battery or 4-cell battery.
16. Install the base cover.
17. Follow the procedure in After working inside your computer.
Removing and installing components
61
To Next Page
Loading...
