Dell Inspiron 560s - Page 34

Processor L1 Cache
Displays the amount of processor Level 1 cache.
Processor L2 Cache
Displays the amount of processor Level 2 cache.
Memory Installed
Indicates the amount of installed memory.
Memory Available
Indicates the amount of available memory.
Memory Speed
Indicates the frequency of installed memory.
Memory Technology
Indicates the type of installed memory.

Standard CMOS Features
Date
Displays current date in the format (mm:dd:yyyy).
Time
Displays current time in the format (hh:mm:ss).
SATA 0
Displays the SATA drives connected to the SATA 0 connector.
SATA 1
Displays the SATA drives connected to the SATA 1 connector.
SATA 2
Displays the SATA drives connected to the SATA 2 connector.
SATA 3
Displays the SATA drives connected to the SATA 3 connector.

Advanced BIOS Features
CPU Feature
l Hyper-Threading Technology — Enabled; Disabled (Enabled by default)
l Intel SpeedStep
®
— Enabled; Disabled (Enabled by default)
l Virtualization — Enabled; Disabled (Disabled by default)
l Limit CPUID Value — Enabled; Disabled (Disabled by default)
l CPU XD Support — Enabled; Disabled (Enabled by default)
l Multi Core Support — Enabled; Disabled (Enabled by default)
USB Device Setting
l USB Controller — Enabled; Disabled (Enabled by default)
l USB Operation Mode — HiSpeed; FullSpeed (HiSpeed by default)

Advanced Chipset Features
Onboard Audio
Controller
Enabled; Disabled (Enabled by default)
SATA Mode
ATA; RAID (ATA by default)
Onboard LAN Controller
Enabled; Disabled (Enabled by default)
Onboard LAN Boot ROM
Enabled; Disabled (Disabled by default)

Boot Device Configuration
Boot Settings
Configuration
l Fast Boot — Enabled; Disabled (Enabled by default)
l Numlock Key — On; Off (On by default)
l Keyboard Errors — Report; Do Not Report (Report by default)
Removable Boot Priority
Used to set the device priority of removable devices like USB floppy drives. The items displayed are dynamically updated
according to the removable devices connected.
Hard Disk Boot Priority
Used to set the device priority of hard drives. The items displayed are dynamically updated according to the hard drives detected.
CD/DVD Boot Priority
Used to set the device priority of CD/DVD drives. The items displayed are dynamically updated according to the CD/DVD drives
detected.
Network Boot Priority
Used to set the device priority of network devices. The items displayed are dynamically updated according to the network devices
detected.
USB Boot Priority
Used to set the device priority of USB drives. The items displayed are dynamically updated according to the USB drives detected.
1st Boot Device
Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Hard Drive by default)
2nd Boot Device
Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (USB by default)
3rd Boot Device
Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (CD/DVD by default)
4th Boot Device
Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Removable Dev. by default)
5th Boot Device
Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Network by default)

Power Management Setup
ACPI Suspend Type
S1; S3 (S3 by default)
Remote Wake Up
Enabled; Disabled (Enabled by default)
AC Recovery
Power Off; Power On; Last Power State (Power Off by default)
Auto Power On
Enabled; Disabled (Disabled by default)
Auto Power On Date
0
Auto Power On Time
0:00:00
