Customizing System Features 2-3
$FFHVVLQJWKH6HWXS3URJUDP
&$87,217R DY RLGGDW DORVVH[LWD Q\DSSOLFDWLRQSURJUDPVE HIRUHUHERRW
LQJWK HFR PSXWHUWRH QWHUWKH6HWXSSURJU DP
To access the Setup program, press <F2> when prompted during start-up. The com-
puter reboots automatically when you exit the Setup program.
The Main menu of the Setup program shows how the computer is configured. In
addition to the Main menu (see Figure 2-1), you can also access the System Devices
menu, Security menu, Power menu, Boot menu, and Exit menu.
NOTE: When you press <F9>, the computer resets the default values for each option
in that menu. When you press <F10>, the computer saves the current values and
exits the Setup program.
0DLQ0HQX2SWLRQV
The following subsections explain each option in the Main menu (see Figure 2-1) of
the Setup program. The same information is also available in the topic titled “Main
Menu” in the
System User’s Guide
.
)LJXUH0DLQ0HQXRI6HWXS3URJUDP
Main System Devices Security Power Boot Exit
System Time: [03:06:18]
System Date: [08/15/1998]
Floppy Drive: 1.44 MB, 3 1/2”
Hard Disk: 4100 MB
Quiet Boot: [Enabled]
Video Display Device: [Simul Mode]
Television Type: [Disabled]
System Memory: 640 KB
Extended Memory: 32 MB
Visit our Web site at http://www.dell.com/
PhoenixBIOS Setup Utility
Item Specific Help
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
ESC Exit ↔ Select Menu Enter Select ‰ Sub-Menu F10 Save and Exit