Setting up the LTE (4G) connection
Topics:
• Installing the Nano-SIM card
• Activating the Nano-SIM card
Installing the Nano-SIM card
NOTE:
The Nano-SIM card slot is available in your computer depending on the region and configuration you ordered.
NOTE: The Nano-SIM card might be preinstalled in your computer depending on the configuration you ordered. If you
have purchased the Nano-SIM card after purchasing your computer, you must install the Nano-SIM card in its slot, and
then activate the Nano-SIM card.
1. Locate the Nano-SIM card tray.
2. Insert the SIM eject tool (or paper clip) into the hole, next to the Nano-SIM card tray until the tray pops out.
3. Pull the tray and place the Nano-SIM card in the tray.
4. Push the tray back into the slot.
5. Turn on your computer and activate the Nano-SIM card.
Activating the Nano-SIM card
NOTE:
Ensure that you Install the Nano-SIM card in your computer before activating the Nano-SIM card. If the Nano-
SIM card is already preinstalled, proceed to activate your Nano-SIM card.
You must activate your Nano-SIM card after installing it in your computer.
1. Install the Nano-SIM card in your computer. If the Nano-SIM card is already preinstalled, skip this step.
2. Click the Start button.
3. Click the MyDell LTE tile.
The Online On the Go window appears.
2
6 Setting up the LTE (4G) connection
To Next Page
Loading...
