Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the memory modules.
4. Remove the solid-state drive.
5. Remove the hard drive.
6. Remove the coin-cell battery.
7. Remove the wireless card.
8. Remove the speakers.
9. Remove the fan.
10. Remove the display assembly.
11. Remove the I/O board.
12. Remove the power button with fingerprint reader.
13. Remove the system board.
Procedure
1. Peel the tapes that secure the antenna cables to the keyboard bracket.
2. Remove the antenna cables from the routing guides on the keyboard bracket.
3. Remove the 24 screws (M1.2x1.4) that secures the keyboard bracket to the keyboard.
NOTE:
Lift the plastic sheet on the keyboard bracket to access the screws.
4. Peel off the tapes that secure the keyboard bracket to the palm-rest assembly.
5. Lift the keyboard bracket off the keyboard.
56
Removing and installing components
To Next Page
Loading...
