4. Follow the procedure from step 3 to step 8 in "Replacing the keyboard".
Post-requisites
1. Replace the system board.
2. Replace the I/O board.
3. Replace the display assembly.
4. Replace the fan.
5. Replace the speakers.
6. Replace the wireless card.
7. Replace the coin-cell battery.
8. Replace the hard drive.
9. Replace the solid-state drive.
10. Replace the memory modules.
11. Replace the battery.
12. Replace the base cover.
Palm-rest and antenna assembly
Removing the palm-rest and antenna assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the base cover.
62
Removing and installing components
To Next Page
Loading...
