Replacing the power button with fingerprint reader
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
NOTE: Applicable only for computers that are shipped with fingerprint reader.
Procedure
1. Place the fingerprint-reader cable on the keyboard bracket.
2. Adhere the fingerprint-reader cable to the keyboard bracket.
3. Slide and insert the power button with fingerprint-reader cable on the slot on the keyboard bracket.
Removing and installing components
61
To Next Page
Loading...
