Dell Inspiron 8200 User Manual

System Upgrades: Dell Inspiron 8200
2. Use the screw and boss holes at opposite corners of the modem daughter card
to align the card, and press the card into its connector on the system board.
3. Install the M2 x 3-mm screw that secures the card to the system board.
4. Replace the memory module/modem cover.
Mini PCI Card
You must remove the optional Mini PCI wireless modem (if installed) before the
system board can be removed. A wireless modem card must be connected to the
internal antenna of the computer.
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
Mini PCI Card Cover
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (6 of 9) [2/28/2004 7:40:50 AM]

Dell Inspiron 8200 Specifications

General

Processor	Intel Pentium 4-M
Hard Drive	20 GB to 60 GB
Chipset	Intel 845MP
Display	15-inch UXGA (1600x1200) or 14.1-inch XGA (1024x768)
Operating System	Windows XP Home, Windows XP Professional
Battery	8-cell Lithium-ion
Optical Drive	DVD-ROM
Ports	S-Video, Parallel, Serial, VGA
Wireless	802.11b
Maximum Resolution	1600x1200