1 cam screw
2 perpendicular
screwdriver
3 processor die (do not
touch)
a. Loosen the cam screw that secures the microprocessor module. The
location of the screw and the rotation direction may vary with the socket
manufacturer; look for small icons indicating open and locked positions.
b. Use the microprocessor extraction tool to remove the microprocessor
module.
Replacing the Microprocessor Module
NOTICE: If you received a flash BIOS update program floppy disk or CD with
the replacement microprocessor, you must update the BIOS after replacing the
microprocessor module.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/cpu.htm (3 of 5) [2/28/2004 7:40:54 AM]
To Next Page
Loading...
