1 M2.5 x 20-mm screws
(9)
8. Turn the computer over.
9. Use the pull loop to disconnect the palm-rest flex cable from the touch-pad
connector on the system board.
10. On the left and right sides of the palm rest, use a flat-blade scribe between the
palm rest and the bottom case of the computer to separate the snaps that
secure the palm rest to the bottom case.
11. Lift out the palm rest.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/palmrest.htm (3 of 4) [2/28/2004 7:40:55 AM]
To Next Page
Loading...
