Back to Contents Page
Palm Rest
Dell™ Inspiron™ 8600 Service Manual
CAUTION: Before performing the following procedures, read the safety instructions
in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
NOTICE: You must remove the display assembly before you remove the palm rest; the display
hinges pass through the back of the palm rest.
3. Remove the display assembly.
4. Remove the microprocessor thermal-cooling assembly.
5. Remove the video card.
6. Remove the 13 M2.5 x 12-mm screws from the bottom of the computer.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/...UT%20PARALLEL%20SERIAL_SERV_MAN/palmrest.htm (1 of 4)6/21/2004 1:14:22 AM
To Next Page
Loading...
