3. Turn over the computer and open the display.
4. Remove the central control cover.
5. Disconnect the display cable using the pull-tab, and release the cable from the four cable-
routing clips.
NOTE: When you replace the display assembly, ensure that you route the display cable under
the EMI clip and cable-routing clips.
6. Lift the display out of the computer.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS...UT%20PARALLEL%20SERIAL_SERV_MAN/display.htm (2 of 7)6/21/2004 1:14:20 AM
To Next Page
Loading...
