Table 31. POST Behavior (continued)
Option Description
● Auto
Extended BIOS POST
Time
Allows you to create an additional preboot delay.
Click one of the following options:
● 0 seconds—Default
● 5 seconds
● 10 seconds
Full Screen Logo
Allows you to display full screen logo, if your image matches screen resolution.
● Enable Full Screen Logo
This option is not set by default.
Warnings and Errors
Allows you to select different options to either stop, prompt and wait for user input, continue
when warnings are detected but pause on errors, or continue when either warnings or errors are
detected during the POST process.
Click one of the following options:
● Prompt on Warnings and Errors—Default
● Continue on Warnings
● Continue on Warnings and Errors
MAC Address Pass-
Through
This feature replaces the external NIC MAC address (in a supported dock or dongle) with
selected MAC address from the system.
Click one of the following options:
● Passthrough MAC Address—Default
● Integrated NIC 1 MAC Address
● Disabled
Virtualization support
Table 32. Virtualization Support
Option Description
Virtualization
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by the Intel Virtualization technology.
● Enable Intel Virtualization Technology
This option is set by default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by the Intel Virtualization technology for direct I/O.
● Enable VT for Direct I/O
This option is set by default.
Wireless options
Table 33. Wireless
Option Description
Wireless Switch
Allows to set the wireless devices that can be controlled by
the wireless switch.
System setup 31
To Next Page
Loading...
