Table 7. System setup optionsāStorage menu (continued)
Storage
Enable SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.
By default, the Enable SMART Reporting option is not enabled.
Drive Information
M.2 PCIe SSD
Type Displays the M.2 PCIe SSD type information of the system.
Device Displays the M.2 PCIe SSD device information of the system.
Table 8. System setup optionsāDisplay menu
Display
Display Brightness
Brightness on battery power Enable to set screen brightness when the system is running on battery power.
Brightness on AC power Enable to set screen brightness when the system is running on AC power.
Touchscreen Enable or disable the touchscreen functionality.
By default, this option is enabled.
EcoPower Enable or disable EcoPower Feature in your panel. EcoPower can increase
the battery life of your system by reducing the display brightness when
appropriate.
By default, Enable EcoPower option is enabled.
Full Screen Logo Enable or disable full screen logo.
By default, the option is not enabled.
Table 9. System setup optionsāConnection menu
Connection
Wireless Device Enable
WLAN Enable or disable the internal WLAN device.
By default, the option enabled.
Bluetooth Enable or disable the internal Bluetooth device
By default, the option enabled.
Enable UEFI Network Stack Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.
HTTPs Boot Feature
HTTPs Boot Enable or disable the HTTPs Boot feature.
By default, the HTTPs Boot option is disabled.
HTTP(s) Boot Modes
Auto Mode HTTP(s) Boot automatically extracts Boot URL from the DHCP
Manual Mode HTTP(s) Boot reads Boot URL provided by the user.
62 BIOS setup
To Next Page
Loading...
