Table 39. Pre-boot Behavior (continued)
Options Description
Enable Dock Warning Messages
This field contains a toggle switch to enable or disable dock
warning messages.
Fastboot
Fastboot
This field allows the user to configure the speed of the UEFI
boot process. The options here are as follows:
● Minimal - reduces boot time by skipping certain hardware
and configuration initialization during boot
● Thorough - Performs complete hardware and configuration
initialization during boot
● Auto - Allows the BIOS to decide configuration
initialization performed during boot
Extend BIOS POST Time
Extend BIOS POST Time
This field allows the user to configure the BIOS POST load
time. The options are as follows:
● 0 seconds
● 5 seconds
● 10 seconds
MAC Address Pass-Through
MAC Address Pass-Through
This field allows the user to configure the MAC address pass-
through replacing the external NIC MAC address.:
● System Unique MAC Address
● Integrated NIC 1 MAC Address
● Disabled
Virtualization
This section provides details on Virtualization settings.
Table 40. Virtualization
Options Description
Intel Virtualization Technology
Enable Intel Virtualization Technology(VT)
This field contains a toggle switch to enable or disable
Virtualization to run Virtual machine monitor(VMM).
VT for Direct I/O
Enable Intel VT for Direct I/O
This field allows the user to enable or disable the system from
being able to perform VT for Direct I/O.
Intel Trusted Execution Technology(TXT)
Enable Intel Trusted Execution Technology(TXT)
This field contains a toggle switch to enable or disable the
option to allow a Measured VMM to utilize the additional
hardware capabilities provided by Intel TXT. The following
must be enabled to configure Intel TXT:
● Trusted Platform Module(TPM)
● Intel Hyper-Threading
38 System setup
To Next Page
Loading...
