After working inside your tablet
CAUTION: Leaving stray or loose screws inside your tablet may severely damage your tablet.
1 Replace all screws and ensure that no stray screws remain inside your tablet.
2 Connect any external devices, peripherals, and cables you removed before working on your tablet.
3 Replace any media card, SIM card, and any other parts that you removed before working on your tablet.
4 Connect your tablet and all attached devices to their electrical outlets.
5 Turn on your tablet.
Installing a microSD and/or micro-SIM card
1 Flip the tablet on a plane surface.
2 Slide and lift the SD cover.
3 Insert the SD card and/or micro-SIM cards into the slots indicated on the slots.
4 Align the cover with the groove on the tablet and slide it inside to secure the microSD and the micro-SIM cards.
5 You can perform the same steps to remove the microSD or micro SIM cards
14
Using your tablet