Table 26. Contacted smart-card reader specifications (continued)
Title Description Dell ControlVault 3 smart-card
r
eader
T=0 support Cards support character level
transmission
Yes
T=1 support Cards support block level transmission Yes
EMVCo Compliant Compliant with EMVCo (for electronic
payment standards) smart-card
standards as posted to www.emvco.com
Yes
EMVCo Certified Formally certified based on EMVCO
smart-card standards
Yes
PC/SC OS interface Personal Computer/Smart-card
specification for integration of hardware
readers into personal computer
environments
Yes
CCID driver compliance Common driver support for Integrated
Circuit Card Interface Device for OS
level drivers.
Yes
Windows Certified Device certified by WHCK Yes
FIPS 201 (PIV/HSPD-12) Compliant
through GSA
Device compliant with FIPS 201/PIV/
HSPD-12 requirements
Yes
FIDO2 compliance Dell ControlVault 3 Smart-card reader is
compliant with the FIDO SPEC
Yes
Operating and storage environment
This table lists the operating and storage specifications of your Latitude 5340/Latitude 5340 2-in-1.
Airborne contaminant level: G1 as defined by ISA-S71.04-1985
Table 27. Computer environment
Description Operating Storage
Temperature range
0°C to 35°C (32°F to 95°F) -40°C to 65°C (-40°F to 149°F)
Relative humidity (maximum)
10% to 90% (non-condensing) 0% to 95% (non-condensing)
Vibration (maximum)
*
0.66 GRMS 1.30 GRMS
Shock (maximum)
110 G† 160 G†
Altitude range
-15.2 m to 3048 m (-49.87 ft to 10000
f
t)
-15.2 m to 10668 m (-49.87 ft to 35000
ft)
CAUTION:
Operating and storage temperature ranges may differ among components, so operating or storing
the device outside these ranges may impact the performance of specific components.
* Measured using a random vibration spectrum that simulates user environment.
†
Measured using a 2 ms half-sine pulse.
Dell Support policy
For information on Dell support policy, search in the Knowledge Base Resource at www.dell.com/support.
32 Specifications of Latitude 5340/Latitude 5340 2-in-1
To Next Page
Loading...
