2. Replace the single (M2x3) screw to secure the bracket to the palmrest [2].
Next steps
1. Replace the M.2 2230 solid-state drive or the M.2 2280 solid-state drive, whichever applicable.
2. Replace the battery.
3. Replace the base cover.
4. Replace the microSD card.
5. Follow the procedure in after working inside your computer.
Inner frame
Removing the inner frame
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WLAN card.
6. Remove the M.2 2230 solid-state drive or the M.2 2280 solid-state drive, whichever applicable.
7. Remove the M.2 SSD bracket.
52
Disassembly and reassembly