Dell Latitude 5400 - Heat Sink; Removing the Heatsink Assembly

Next steps
1. Replace the battery.
2. Replace the base cover.
3. Replace the microSD card.
4. Follow the procedure in after working inside your computer.
Heat sink
Removing the heatsink assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the inner frame.
Steps
1. Disconnect the system fan cable from the connector on the system board.
74
Disassembly and reassembly