Dell Latitude 5400 - Installing the Keyboard Bracket

7. Remove the DC-in .
8. Remove the WLAN card.
9. Remove the system board.
NOTE: System board can be removed with heatsink assembly attached.
10. Remove the coin cell battery.
11. Remove the keyboard.
Steps
1. Remove the six (M2x2) screws that secure the keyboard to the keyboard bracket [1].
2. Remove the keyboard from the keyboard bracket [2].
Installing the keyboard bracket
Steps
1. Align and place the keyboard on the keyboard bracket [1].
2. Replace the six (M2x2) screws to secure the keyboard on the keyboard bracket [2].
Disassembly and reassembly
91