Next steps
1. Replace the M.2 SSD holder.
2. Replace the M.2 SSD.
3. Replace the WLAN card.
4. Replace the battery.
5. Replace the base cover.
6. Replace the microSD card.
7. Follow the procedure in after working inside your computer.
SmartCard reader
Removing the SmartCard reader
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WLAN card.
6. Remove the inner frame.
52
Disassembly and reassembly