Option Description
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
POST behavior
Option Description
Adapter
Warnings
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
Default setting: Enable Adapter Warnings
Numlock Enable Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys. The available options are:
● Fn Lock—enabled by default
● Lock Mode Disable/Standard—enabled by default
● Lock Mode Enable/Secondary
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
● Minimal
● Thorough—enabled by default
● Auto
Extended BIOS
POST Time
Allows you to create an extra preboot delay. The options are:
● 0 seconds—enabled by default.
● 5 seconds
● 10 seconds
Full Screen Log
● Enable Full Screen Logo—not enabled
Warnings and
errors
● Prompt on warnings and errors—enabled by default
● Continue on warnings
● Continue on warnings and errors
Manageability
Option
Description
Intel AMT
Capability
Allows you to provision AMT and MEBx Hotkey function is enabled, during the system boot.
● Disabled
● Enabled - by default
● Restrict MEBx Access
USB Provision When enabled Intel AMT can be provisioned using the local provisioning file via a USB storage device.
● Enable USB Provision - disabled by default
MEBX Hotkey Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
● Enable MEBx hotkey—enabled by default
System setup 33
To Next Page
Loading...
