Power adapter port
Removing the power adapter port
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
1. Remove the single (M2x3) screw from the metal bracket on the power adapter port [1].
2. Remove the metal bracket that secures the power adapter port [2].
3. Disconnect the power adapter port cable from the system board [1].
4. Lift and remove the power adapter port from its slot in the palmrest [2].
Installing the power adapter port
1. Connect the power adapter port cable to its connector on the system board [1].
2. Place the power adapter port into its slot on the palmrest [2].
36
Removing and installing components
To Next Page
Loading...
