Coin cell
Removing the coin cell
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the memory.
5. Remove the SSD.
6. Remove the WLAN card.
7. Remove the heatsink-fan assembly.
8. Remove the power adapter port.
9. Remove the LED daughterboard.
10. Remove the speaker.
11. Remove the display assembly.
12. Remove the touchpad buttons.
13. Remove the hinge cap.
14. Remove the display bezel.
15. Remove the hinges.
16. Remove the display panel.
17. Remove the camera-microphone daughterboard.
18. Remove the display cable.
19. Remove the system board.
1. Disconnect the coin cell cable from the connector on the system board [1].
2. Remove the coin cell from the computer.
Installing the coin cell
Connect the coin cell cable to its connector on the system board.
76
Removing and installing components
To Next Page
Loading...
