NOTE: There are 2 speaker cables to disconnect.
4. Remove the single screw (M2x4) securing the system board in place.
5. Remove the system board from the system.
6. Carefully lift and remove the system board away from the palm-rest and keyboard assembly.
NOTE: Transfer the re-useable WLAN, WWAN (for WWAN only) absorbers (including WWAN cover), CPU absorber (for
WWAN only), and CPU graphite to the new system board. CPU absorber and CPU graphite are located underneath the
system board.
WLAN absorber
WWAN absorber
Removing and installing components
49
To Next Page
Loading...
