Dell Latitude 7400 2-in-1 Setup And Specifications Guide

Create a USB recovery drive for Windows
Create a recovery drive to troubleshoot and x problems that may occur with Windows. An empty USB ash drive with a minimum capacity
of 16 GB is required to create the recovery drive.
Prerequisites
NOTE: This process may take up to an hour to complete.
NOTE: The following steps may vary depending on the version of Windows installed. Refer to the Microsoft support site for
latest instructions.
Steps
1 Connect the USB ash drive to your computer.
2 In Windows search, type Recovery.
3 In the search results, click Create a recovery drive.
The User Account Control window is displayed.
4 Click Yes to continue.
The Recovery Drive window is displayed.
5 Select Back up system les to the recovery drive and click Next.
6 Select the USB ash drive and click Next.
A message appears, indicating that all data in the USB ash drive will be deleted.
7 Click Create.
8 Click Finish.
For more information about reinstalling Windows using the USB recovery drive, see the Troubleshooting section of your product's
Service Manual at www.dell.com/support/manuals.
2
Create a USB recovery drive for Windows 7

Dell Latitude 7400 2-in-1 Specifications

General

Storage	Up to 1TB PCIe NVMe SSD
Graphics	Intel UHD Graphics 620
Operating System	Windows 10 Pro
Processor	8th Generation Intel Core i5/i7
Display	14.0-inch FHD (1920 x 1080) Touchscreen
RAM	Up to 16GB
Battery	4-cell 52 Whr Integrated Battery
Weight	Starting at 1.36 kg (3.0 lbs)
Ports	1 x HDMI, 1 x microSD card reader, 1 x headphone/microphone combo jack
Wireless	Bluetooth 5.0
Dimensions	0.59 inches (14.89 mm)