Dell OPTIPLEX 3010 Desktop - Installing the PSU Thermal Sensor

4. Unthread the thermal-sensor cable from the chassis clip.
5. Pry the thermal sensor away from the power supply and remove from the chassis.
Related Links
Installing The PSU Thermal Sensor
Installing The PSU Thermal Sensor
1. Secure the thermal sensor to the power supply.
2. Thread the thermal-sensor cable into the chassis clip.
3. Connect the thermal-sensor cable to the system board.
4. Install the cover.
5. Follow the procedures in After Working Inside Your Computer.
Related Links
Removing The PSU Thermal Sensor
32