2. Install the Side cover.
3. Follow the procedure in After working inside your computer.
Speaker
Removing speaker
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. Heat sink blower
3. To remove the speaker:
a. Release the speaker cable from the retention hooks on the heat sink blower [1].
b. Remove the two (M2.5x4) screws that secure the speaker to the heat sink blower [2].
c. Remove the speaker from the heat sink blower [3].
34
Disassembly and reassembly
To Next Page
Loading...
