23
Communications – INTEGRATED Realtek® RTL8111HSD-CG
10/100/1000M Ethernet
INTEGRATED Realtek® RTL8111HSD-CG
1
3240 AIO
External Connector Type RJ45
Data Rates supported 10/100/1000 Mbps
1
Controller Details
Controller bus architecture
PCIe-based interface for S0 state, SMBus for Sx
low power state
Integrated memory N/A
Data transfer mode (example Bus-Master DMA) N/A
Power consumption (full operation per data rate
711mW (Max.)
Power consumption (standby operation) 227mW (Max.)
IEEE standards compliance (example 802.1P) 802.3
Hardware Certifications (example FCC, B, GS
N/A
Boot ROM Support EEPROM (located in SPI)
Network Transfer Mode
Network Transfer Rate (example 10BASE-T (half-
duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
10 Mb (full/half-duplex)
100 Mb (full/half-duplex)
1000 Mb (full-duplex)
Environmental
Operating temperature 0° C to 70° C (32° F to 102° F)
Operating humidity 20% to 80% (non-condensing)
Operating System Driver Support
Windows 7 32/64, Windows 8.1 64, Windows 10
64
Manageability (examples WOL, PXE) WOL, PXE 2.1
1
This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission,
connection to a Gigabit Ethernet server and network infrastructure is required.