Dell OptiPlex 390 - Hard Drives, Removable Storage, System Expansion Slots

DELL™ OPTIPLEX™ 390 TECHNICAL GUIDEBOOK —FINAL
12
HARD DRIVES
MT DT SFF
Bays:
5.25-inch Optical Bay Supported (External) 2 1 1
Optical Drives Supported (maximum) 2 1 1 (slim-line)
Hard Drive Bay Supported (Internal) 2 1 1
Hard Drives Supported 3.5”(maximum) 2 1 1
Interface:
SATA 2.0 4 4 2
SATA 3.0 (chipset does not support)
3.5” Hard Drives:
1TB
1
SATA 7200 RPM HDD X X X
500GB
1
SATA 7200 RPM HDD X X X
320GB
1
SATA 7200 RPM HDD X X X
250GB
1
SATA 7200 RPM HDD X X X
REMOVABLE STORAGE
NOTE: Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter on the MT and DT and may require a slim
MT DT SFF
Optical Drive: (SFF require slim-line optical drive)
DVD+/-RW
2
SATA 1.5Gbit/s X X X
DVD-ROM
3
SATA 1.5Gbit/s X X X
Media Card Reader: (requires slim line optical)
Dell 19 in 1 Media Card Reader X X
SYSTEM EX PANSION SLOTS
NOTE: See Detailed Engineering Specifications for maximum card dimensions.
NOTE: Add in card location and priority: PCIe x16: GFX, USB 3.0, Serial, Parallel/Serial, NIC, Wireless; PCIe x1: USB 3.0, Serial,
MT DT SFF
PCIe x16 Slot 1 1 1
PCIe x1 Slot 3 3 1
Serial ATA (SATA) connectors 4 4 2
1
For hard drives, GB means 1 billion bytes; actual capacity varies with preloaded material and operating environment and will be less.
2
Discs burned with this drive may not be compatible with some existing drives and players; using DVD+R media provides maximum compatibility.
3
DVD-ROM drives may have write-capable hardware that has been disabled via firmware modifications.