Dell OptiPlex 390 - Installing The Intrusion Switch

DELL™ OPTIPLEX™ 390 TECHNICAL GUIDEBOOK —FINAL
24
COMMUNICATIONS – SERIAL / PARALLEL PORT PCIE ADD-I N CARD
NO T E: M T s u p por t s ful l h e i g h t ( F H ) ca r d.
SERIAL / PARALLEL PORT PCIE ADD-IN CARD
MT DT SFF
Connector Type RS-232 and IEEE1284
Data Rates supported
50bps ~115.2Kbps(Serial)&Maximum 1.8MBp(Parallel)
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express one lane (x1)
Driver Support
Microsoft Client XP/Vista/7 (X86/X64)
Microsoft Server 2000/2003/2008 (X86/X64)
Microsoft Embedded XP Embedded/POS Ready 2009/
Embedded System 2009
Linux Linux 2.4.x/2.6.x
DOS DOS
Full height Serial / Parallel add-in card Optional
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)
LOW PROFILE PARALLEL PORT PCIE ADD-IN CARD
MT DT SFF
Connector Type IEEE1284
Data Rates supported Maximum 1.8MBp
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express one lane (x1)
Driver Support
Microsoft Client XP/Vista/7 (X86/X64)
Microsoft Server 2000/2003/2008 (X86/X64)
Microsoft Embedded XP Embedded/POS Ready 2009/
Embedded System 2009
Linux Linux 2.4.x/2.6.x
DOS DOS
Low Profile Parallel add-in card Optional
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)