Dell OptiPlex 5080 Small Form Factor Setup And Specifications

Memory
NOTE: A multiple-DIMM memory option is recommended to prevent any performance reduction. If the system configuration
includes integrated graphics, consider selecting 2 or more DIMMs.
NOTE: Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory
modules are not installed in matched pairs, the computer continues to operate, but with a slight reduction in performance.
The entire memory range is available to 64-bit operating systems.
Table 5. Memory specifications
Description Values
Slots
Two DIMM slots
Type
DDR4
Speed
2666 MHz
Maximum memory
64 GB
Minimum memory
4 GB
Memory size per slot
4 GB, 8 GB, 16 GB, 32 GB
Configurations supported
● 4 GB, 1 x 4 GB
● 8 GB, 1 x 8 GB
● 8 GB, 2 x 4 GB
● 16 GB, 2 x 8 GB
● 16 GB, 1 x 16 GB
● 32 GB, 1 x 32 GB
● 32 GB, 2 x 16 GB
● 64 GB, 2 x 32 GB
Intel Optane memory
Intel Optane memory functions only as a storage accelerator. It neither replaces nor adds to the memory (RAM) installed on
your computer.
NOTE:
Intel Optane memory is supported on computers that meet the following requirements:
● 7
th
Generation or higher Intel Core i3/i5/i7 processor
● Windows 10 64-bit version or higher (Anniversary Update)
● Latest version of Intel Rapid Storage Technology driver
● UEFI boot mode configuration
Table 6. Intel Optane memory
Description Values
Type
Memory/Storage/Storage accelerator
Interface
Gen 3 PCIe x4 NVMe
Connector
M.2 2280
Configurations supported
16 GB and 32 GB
Capacity
Up to 32 GB
16 Technical specifications

Dell OptiPlex 5080 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex 5080 Small Form Factor
Category	Desktop
Language	English