Dell OptiPlex 5260 All-in-One - Height Adjustable stand

4 To install the basic stand onto the computer:
a Align the tabs on the basic stand with the slots on the back cover [1].
b Snap the basic stand into place on the back cover [2].
5 Follow the procedure in After working inside your computer.
Removing the basic stand
1 Follow the procedure in Before working inside your computer.
2 To avoid damaging the display, place the system on a at, soft, and clean surface.
3 To remove the basic stand:
a Slide the release tab forward to release the basic stand from the back cover [1].
b Hold the tab in the release position and lift the basic stand upward [2].
Basic stand for Dell OptiPlex 5260 and 7460 All-in-One
7