Dell OptiPlex 5400 All-in-One - Power Supply Connector; Display

Table 18. Power ratings (continued)
Description Option one Option two
Input voltage 90 VAC to 264 VAC 90 VAC to 264 VAC
Input frequency 47 Hz to 63 Hz 47 Hz to 63 Hz
Input current (maximum) 3.6 A 3.6 A
Output current (continuous)
● +19.5 VA/7.5 A
● +19.5 VB/7.0 A
Standby mode:
● +19.5 VA/0.5 A
● +19.5 VB/1.75 A
● +19.5 VA/7.5 A
● +19.5 VB/7.0 A
Standby mode:
● +19.5 VA/0.5 A
● +19.5 VB/1.75 A
Rated output voltage
● +19.5 VA
● +19.5 VB
● +19.5 VA
● +19.5 VB
Temperature range
Operating 5°C to 42°C (41°F to 107°F) 5°C to 42°C (41°F to 107°F)
Storage -40°C to 70°C (-40°F to 158°F) -40°C to 70°C (-40°F to 158°F)
Power supply connector
The following table lists the Power supply connector specifications of your OptiPlex 5400 All-in-One.
Table 19. Power supply connector
155 W (80 PLUS Bronze)
● One 16 pin connector for system board
● One 2 pin connector for LED
160 W (80 PLUS Bronze)
● One 16 pin connector for system board
● One 2 pin connector for LED
Display
The following table lists the display specifications of your OptiPlex 5400 All-in-One.
Table 20. Display specifications
Description Option one (non-touch display) Option two (touch-display)
Display type
Full High Definition (FHD) Full High Definition (FHD)
Display-panel technology
Wide Viewing Angle (WVA) Wide Viewing Angle (WVA)
Display-panel dimensions (active area):
Height
296.46 mm (11.67 in.) 296.46 mm (11.67 in.)
Width
527.04 mm (20.75 in.) 527.04 mm (20.75 in.)
Diagonal
604.70 mm (23.81 in.) 604.70 mm (23.81 in.)
Display-panel native resolution
1920 x 1080 1920 x 1080
Luminance
● 200 nits (minimum)
● 250 nits (typical)
● 200 nits (minimum)
● 250 nits (typical)
Specifications of OptiPlex 5400 All-in-One 27