Dell OptiPlex 7040 - Mini Tower - Removing the Optional SSD Card; Removing the SD Card Reader

6. Close the front bezel door.
7. Install the:
a. bezel
b. cover
8. Follow the procedure in After Working Inside Your Computer.
Removing the optional SSD card
1. Follow the procedure in Before Working Inside Your Computer.
2. Remove the:
• cover
• bezel
3. Open the front bezel door.
4. Remove the screw that secures the SSD card to the system board.
5. Disconnect the SSD card from the connector on the system board.
6. Remove the rubber from the system board.
Removing the SD card reader
1. Follow the procedure in Before Working Inside Your Computer.
2. Remove the:
• cover
• bezel
3. Open the front bezel door.
4. To remove the SD card reader:
a. Disconnect the SD card reader cable from the connector on the system board [1].
b. Remove the screw that secures the SD card reader to the computer [2].
c. Lift the SD card reader out of the computer [3].
15