NOTE: Note the orientation of the hard drive so that you can replace it correctly.
Removing the hard-drive bracket
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5 in. hard-drive assembly.
About this task
The following images indicate the location of the hard-drive bracket and provide a visual representation of the removal procedure.
Steps
1. Pull one side of the hard-drive bracket to disengage the pins on the bracket from the slots on the drive.
2. Lift the hard-drive out of the bracket.
Installing the hard-drive bracket
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
Disassembly and reassembly
23
To Next Page
Loading...
