13
MT DT SFF
Chassis Volume liters
33 16 10.7
Chassis Weight*
1
pounds/kilograms
25.8/11.70 18.2/8.26 15/6.80
Chassis Dimensions: (HxWxD)
Height inches/centimeters
16.3 / 41.4 4.5 / 11.4 3.65 / 9.26
Width inches/centimeters
7.3 / 18.5 15.7 / 39.9 12.4 / 31.4
Depth inches/centimeters
17.3 / 43.9 13.9 / 35.3 13.4 / 34
Shipping Weight*
1
pounds/kilograms includes packaging
materials
43.5/19.73 28/12.7 21.3/9.66
Packaging Parameters (HxWxD)
2
Height inches/centimeters
22.38/56.85 20.63/52.4 20.88/50.04
Width inches/centimeters
22.25/56.52 20.31/51.59 19.38/49.23
Depth inches/centimeters
14.25/36.2 11.75/29.85 10.63/27
MT DT SFF
PCI Slots
2 2 1
Height (inches/centimeters)
4.376 / 11.115 2.731 / 6.89
Length (inches/centimeters)
7.4 / 18.796* 6.6 / 16.764
PCIe x16 Slots
1 1 1
Height (inches/centimeters)
4.376 / 11.115 2.731 / 6.89
Length (inches/centimeters)
7.4 / 18.796* 6.6 / 16.764
PCIe x1 Slots
1
Height (inches/centimeters)
4.376/11.115
Length (inches/centimeters)
7.4 / 18.796*
Risers: (replaces 1 PCI slot and 1 PCIe slot on DT system board)
Combo Full Height Riser with 1 PCI and 1 PCIe connector
(HxL)
1
Height (inches/centimeters)
4.376/11.115
Length (inches/centimeters)*,**
6.6/16.764
Dual Full Height Riser with 2 PCI connectors (HxL)
1
Height (inches/centimeters)
4.376/11.115
Length (inches/centimeters)*,**
6.6/16.764
MT DT SFF
Temperature
Operating
10° to 35° C (50° to 95° F)
Non-Operating (Storage)
-40° to 65° C (-40° to -149° F)
Relative Humidity
20% to 80% (non-condensing)
Maximum vibration
Operating
0.25 G at 3 to 200 Hz at 0.5 octave/min
Non-Operating
0.5 G at 3 to 200 Hz at 1 octave/min
Maximum Shock
Operating
Bottom half-sine pulse with a change in velocity of 50.8
cm/sec (20 inches/sec)
1
Weights are approximates and may change based on system configuration and included accessories.
2
Dimensions are DAO specific. Each region has unique packing.
*
Card length can be longer than standard Half-Length Card but cannot be a Full-Length Card.
**
6.9/17.53 in/cm is longer than the standard Half-Length Card
DETAILED ENGINEERING SPECIFICATIONS
SYSTEM DIMENSIONS (PHYSICAL)
NOTE: System Weight* and Shipping Weight* is based on a typical configuration and may vary based on PC configuration. A
typical configuration includes: integrated graphics, one hard drive, one optical drive, and one diskette drive.
SYSTEM BOARD CONNECTOR MAXIMUM ALLOWABLE DIMENSIONS
SYSTEM LEVEL ENVIRONMENTAL AND OPERATING CONDITIONS