EasyManua.ls Logo

Dell OPTIPLEX 740 - Maintenance; Power Management

Dell OPTIPLEX 740
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Video
Primary Video: Auto
Video Memory Size 64MB
Performance
Multiple CPU Core: On
HDD Acoustic Mode: Bypass
Security
Admin Password: (none)
System Password: (none)
SATA-0 Password: (none)
SATA-1 Password: (none)
SATA-2 Password
1
: depends on chassis
SATA-3 Password
2
: Depends on chassis
Password Changes: Unlocked
No Execute: On
Computrace®: Deactivate
Power Management
AC Recovery: Off
Auto Power On: Off
Auto Power Time: 12:00 AM
Low Power Mode: Off
Remote Wake Up: Off
Cool and Quiet: On
Suspend Mode: S3
Maintenance
Service Tag: System specific
ASF Mode: Off
Load Defaults: Cancel
Event Log: Mark All Entries
Post Behavior
Fast Boot: On
Numlock Key: On
POST Hotkeys: Setup & Boot Menu
MEBx Hotkey: On
Keyboard Errors: Report
1
Not present on SFF
2
Only present on MT
Chassis Enclosure & Ventilation Requirements
Enclosure Ventilation If your enclosure has doors, they need to
be of a type that allows at least 30% airflow
through the enclosure (front and back).
Enclosure Minimum Clearance Leave a 10.2 cm (4 in.) minimum clearance on
all vented sides of the computer to permit the
airflow required for proper ventilation.
Recommended Enclosure Do not install your computer in an enclosure
that does not allow airflow. This restricts
the airflow and impacts your computer’s
performance, possibly causing it to overheat.
Open Desk Minimum Clearance If your computer is installed in a corner, on a
desk, or under a desk, leave at least 5.1 cm (2
in.) clearance from the back of the computer
to the wall to permit the airflow required for
proper ventilation.

Other manuals for Dell OPTIPLEX 740

Related product manuals