Table 3. System setup options—System information menu(continued)
General-System Information
Maximum Clock Speed Displays the maximum processor clock speed.
Processor L2 Cache Displays the processor L2 Cache size.
Processor L3 Cache Displays the processor L3 Cache size.
HT Capable Displays whether the processor is HyperThreading (HT) capable.
64-Bit Technology Displays whether 64-bit technology is used.
Device Information
SATA-0 Displays the SATA-0 device information of the computer.
M.2 PCIe SSD-0 Displays the M.2 PCIe SSD information of the computer.
M.2 PCIe SSD-1 Displays the M.2 PCIe SSD information of the computer.
LOM MAC Address Displays the LAN On Motherboard (LOM) MAC address of the computer.
Video Controller Displays the video controller type of the computer.
dGPU Video Controller Displays the discrete graphics information of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
Video Memory Displays the video memory information of the computer.
Panel Type Displays the Panel Type of the computer.
Native Resolution Displays the native resolution of the computer.
Audio Controller Displays the audio controller information of the computer.
Wi-Fi Device Displays the wireless device information of the computer.
Bluetooth Device Displays the bluetooth device information of the computer.
Boot Sequence
Boot Sequence Displays the boot sequence.
Boot List Option Displays the available boot options.
UEFI Boot Path Security Displays the UEFI Boot options.
By default, the Always Except Internal HDD option is enabled.
Date/Time Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.
Table 4. System setup options—System Configuration menu
System Configuration
Integrated NIC Controls the on-board LAN controller.
Enable UEFI Network Stack Enable or disable UEFI Network Stack.
By default, the Enable UEFI Network Stack and Enabled w/PXE options are
enabled.
SATA Operation Configure operating mode of the integrated SATA hard drive controller.
By default, the RAID On option is enabled.
Drives Enable or disable various drives on board.
By default, all the options are enabled.
SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology (SMART)
during system startup.
By default, the Enable SMART Reporting option is not enabled.
System setup 91
To Next Page
Loading...
