Table 4. System setup options—System Configuration menu(continued)
System Configuration
USB Configuration
Enable USB Boot Support Enable or disable booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
By default, the Enable USB Boot Support option is enabled.
Enable Rear USB Ports Enable or disable booting from USB mass storage devices connected to rear USB
port.
By default, the Enable Rear USB Ports option is enabled.
Enable Side USB Ports Enable or disable booting from USB mass storage devices connected to side USB
port.
By default, the Enable side USB Ports option is enabled.
Rear USB Configuration Enable or disable rear USB configuration.
By default, all the options are enabled.
Side USB Configuration Enable or disable rear USB configuration.
By default, all the options are enabled.
USB PowerShare Enable or Disable USB PowerShare
By default, the Enable USB PowerShare option is not enabled.
Audio Enable or disable the integrated audio controller.
By default, all the options are enabled.
OSD Button Management
Disable OSD button Enable or disable OSD button.
By default, the Disable OSD Buttons option is not enabled.
Touchscreen
Touchscreen Enable or disable touchscreen (only for touchscreen computers).
By default, the Touchscreen option is enabled.
Miscellaneous Devices Enable or disable various onboard devices.
Enable Camera Enable or disable the camera.
By default, the Enable Camera option is enabled.
Enable Secure Digital (SD) Card Enable or disable the SD card.
By default, the Enable Secure Digital (SD) Card option is enabled.
Secure Digital (SD) Card Boot Enable or disable the SD card read-only boot.
By default, the Secure Digital (SD) Card Boot option is not enabled.
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
By default, the Secure Digital (SD) Card Read-Only Mode option is not enabled.
Table 5. System setup options—Security menu
Security
Admin Password Set, change, or delete the administrator password.
System Password Set, change, or delete the system password.
Password Configuration Control the minimum and maximum number of characters allowed for the Admin and
System passwords.
92 System setup
To Next Page
Loading...
