CD-ROM Drives: Dell OptiPlex GX1 Small-Form-Factor System User's Guide
file:///C|/infodev/2013/eDoc/OpGX1/UG/diskette.htm[2/21/2013 11:47:22 AM]
4. Install the new drive in the chassis.
Align the tabs along the bottom of the drive with the notches on the chassis, and slide the drive
toward the back of the chassis until it snaps into place (see Figure 2).
Figure 2. Inserting a CD-ROM Drive
1 Tabs (2)
2 Notches (2)
5. Connect a power cable and an interface cable to the appropriate connectors on the back of the drive
(see Figure 3).
Figure 3. Attaching Cables to a CD-ROM Drive
1 Interface cable
2 Power cable
3 Power input connector
4 Interface connector
To Next Page
Loading...
