EasyManua.ls Logo

Dell OptiPlex GX260 Series - back-panel connectors

Dell OptiPlex GX260 Series
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 power light The power light illuminates and blinks or remains solid to indicate different states:
No light — The computer is in the off state (S4, S5, or mechanical OFF)
Steady green — The computer is in the normal operating state
Blinking green — The computer is in a power-saving state (S1 or S3)
To exit from a power-saving state, press the power button or click or move the mouse.
See "Diagnostic Lights
" for a description of light codes that can help you troubleshoot problems with
your computer.
7 front-panel
door
Open the door to use the front-panel connectors. The front-panel door is removable; if you remove it or
accidentally knock it off its hinges, it snaps back in place.
8 optional
stand
Use the stand to place the computer in a vertical position. See "Attaching and Removing the Computer
Stand."
9 service tag The tag is used to identify your computer when you access the Dell | Support website or call technical
support.
10 headphone
connector
Attach headphones.
11 USB
connectors
Connect USB devices such as a mouse, keyboard, printer, joystick, and computer speakers into any of
the USB connectors.
Back View
Small Desktop Computer
1 back-panel
connectors
The connectors for your computer.
2 AGP/DVI card slot The slot for an AGP or DVI adapter card.
3 card slots The slot for PCI cards or a second serial port card.
4 power connector The connection for the power cable.
5 voltage selection
switch (may not be
available on all
computers)
Your computer is equipped with either an auto-sensing voltage selector or a manual voltage
selection switch. Computers with an auto-sensing voltage selector do not have a voltage selection
switch on the back panel and can automatically detect the correct operating voltage.
To help avoid damaging a computer with a manual voltage selection switch, set the switch for the
voltage that most closely matches the AC power available in your location.
NOTICE: The voltage selection switch must be set to the 115-V position even though the
AC power available in Japan is 100 V.

Table of Contents

Other manuals for Dell OptiPlex GX260 Series

Related product manuals