5 line-in
connector
Use the blue line-in connector to attach a record/playback device such
as a cassette player, CD player, or VCR.
On computers with a sound card, use the connector on the card.
6 line-out
connector
Use the green line-out connector to attach headphones and most
speakers with integrated amplifiers.
On computers with a sound card, use the connector on the card.
7 microphone
connector
Use the pink microphone connector to attach a personal computer
microphone for voice or musical input into a sound or telephony
program.
On computers with a sound card, the microphone connector is on the
card.
8 USB 2.0
connectors
(6)
Use the back USB connectors for devices that typically remain
connected, such as printers and keyboards.
9 video
connector
Plug the cable from your VGA-compatible monitor into the blue
connector.
NOTE: If you purchased an optional graphics card, this connector will
be covered by a cap. Connect your monitor to the connector on the
graphics card. Do not remove the cap.
NOTE: If you are using a graphics card that supports dual monitors, use
the y-cable that came with your computer.
10 serial
connector
Connect a serial device, such as a handheld device, to the serial port.
The default designations are COM1 for serial connector 1 and COM2
for serial connector 2.
For more information, see "System Setup Options."
Inside Your Computer
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION: To avoid electrical shock, always unplug your computer from the electrical outlet
before removing the computer cover.
NOTICE: Be careful when opening the computer cover to ensure that you do not accidentally
disconnect cables from the system board.
Mini Tower Computer: Dell OptiPlex GX620<br>User's Guide
http://www.zoion.com/~erlkonig/misc/gx620-userguide/mtabout0.htm
5 of 8
To Next Page
Loading...
