Table 28. Integrated device options (continued)
Option Description
● Enable USB Boot Support
● Enable External USB Port
By default, all the options are enabled.
Disable USB4 PCIE Tunneling
By default the Disable USB4 PCIE Tunneling is disabled.
Storage
Table 29. Storage options
Option Description
SATA/NVMe Operation
Allows you to set the operating mode of the integrated storage
device controller.
The options are:
● Disabled
● AHCI/NVMe
● RAID On—By default, the RAID On option is enabled.
Storage Interface
Allows you to enable or disable various drives on board.
The options are:
● M.2 PCIe SSD-0
● M.2 PCIe SSD-1
By default, all the options are enabled.
SMART Reporting
This field controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of the
Self Monitoring Analysis and Reporting Technology (SMART)
specification. By default, the Enable SMART Reporting option is
disabled .
Drive Information
Provides information about drive type and device.
Display
Table 30. Display options
Option Description
Display Brightness
Allows you to set the screen brightness when running on battery
and AC power.
The options are:
● Brightness on battery power - By default, set to 50.
● Brightness on AC power - By default, set to 100.
EcoPower
EcoPower increases the battery life by reducing the display
brightness when appropriate.
By default Enable EcoPower is enabled.
Full Screen Logo
Displays full screen logo when the image matches screen
resolution.
System setup 27
To Next Page
Loading...
